Maximum Level
Maintain maximum level and simultaneously eliminate overshoots.
Maximum efficiency: 5-band compression
Limiting: Sample accurate, distortion reduced Limiter
Multi Slope: Add gain at mid-levels without squashing the transients
Optimum Quality
The DBMAX employ precise calculations at a full processing rate, in order to keep aliasing distortion low and audio bandwidth high.
Audio quality has been our primary concern when designing the DBMax – hence you can even cascade several units without any sonic penalties.
Bandwidth: Processing at up to 48kHz sample rate for 24kHz audio
Resolution: Processing of all 24bits of an AES/EBU Digital signal
A/D-D/A converters: 24bit resolution with analog pre-scaling
Output Formats
AES/EBU, S/PDIF and Analog outputs are all active simultaneously.
Digital outputs may be dithered to resolutions between 8 and 24bits.
Analog and Digital outputs may have emphasis applied individually.
Gain Transfer
Example of gain transfer and parameters using DBMax.
Presets
The DBMax comes loaded with 60 presets for a variety of different applications.
DBMax Internal Structure
Four selectable Insert algorithms surround the multi-band structure.
The digital output fader may be remotely set via voltage control
*상세설명
DBMax is a Level Maximizer and Audio Enhancement processor for use in digital transmission, linking, webcast and radio STL applications.
High resolution and high sample rate processing prevents unwanted distortion and listening fatigue from being generated, artifacts often associated with comparable processors.
The 5-band section in DBMax can be combined with Automatic Gain Control, Dynamic and Static Stereo Enhancement, Dynamic and Static Eq and other tools for maximizing audio impact and creating a signature sound. Balanced and unbalanced AES/EBU I/O is standard, and outputs are always active. Sample rate conversion can be invoked when using digital inputs. Analog I/O is standard and outputs are always active.
The 24 bit converters are scaled in the analog domain, with scaling under preset control, to minimize noise and maximize headroom under all operating conditions. DBMax can be remotely controlled using GPI or RS485 serial inputs.
Digital Inputs and Outputs
Connectors : XLR (AES/EBU) RCA Phono (SPDIF)
Format : AES/EBU (24 bit), SPDIF (20 bit), EIAJ CP-340, IEC 958,
Output Dither : HPF TPDF dither 8-24 bit
Word Clock Input : BNC, 75 Ohm, 0.6 to 10 Vpp
Sample Rates : 32 kHz, 44.1 kHz, 48 kHz
Processing Delay : 0.5 ms @ 48 kHz
Frequency Response DIO : DC to 23.9 kHz ± 0.01dB @ 48kHz
Sample Rate Conversion
Type : Asychronous
Dynamic Range : 120 dB
THD+N : -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
Input Rate Range : 31 kHz to 49 kHz
Analog Inputs
Connectors : XLR balanced (pin 2 hot)
Impedance : 20 kOhm (balanced)
Max. Input Level : +27 dBu (balanced)
Min Input Level (for 0dBFS) : -4 dBu
A to D Conversion : 24 bit (1 bit, 128 times oversampling)
A to D Delay : 0.8 ms @ 48 kHz
Dynamic Range : >103 dB (unweighted), >106 dB (A)
THD : -95 dB (0.018%) @ 1 kHz -6 dBFS (FS@ +18 dBu)
Frequency Response : 10 Hz to 20 kHz: +0/-0.2dB
Crosstalk : <-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz
Analog Outputs
Connectors : XLR balanced (pin 2 hot)
By-pass : Through relay
Impedance : 40 Ohm (balanced)
Max. Output Level : +26 dBu (balanced)
Full Scale Output Range : -4 dBu to +26 dBu (balanced)
D to A Conversion : 24 bit (1 bit, 128 times oversampling)
D to A Delay : 0.57 ms @ 48 kHz
Dynamic Range : >100 dB (unweighted), >104 dB (A)
THD : -86 dB (0.005%) @ 1kHz, -6 dBFS (FS @ +18 dBu)
Frequency Response : 10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk : <-60 dB, 10 Hz to 20 kHz typical 90 dB @ 1kHz
EMC
Complies with : EN 55103-1, EN 55103-2 FCC part 15, Class B CISPR 22, Class B
Safety
Certified to : IEC 65, EN 60065, UL 1419 and CSA E65
Environment
Operation Temperature : 32° F to 122° F (0° C to 50° C)
Storage Temperature : -22° F to 167° F (-30° C to 70° C)
Humidity : Max. 90% non-condensing
PCMCIA Interface
Connector : PC Card, 68 pin type 1 cards
Standards : PCMCIA 2.0, JEIDA 4.0
Card Format : Supports up to 2 MB SRAM
General
Finish : Anodized aluminum face and top plate Plated and painted steel chassis
LCD : 56 x 128 dot graphic LCD-display
Dimensions : 19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight : 5.2 lb. (2.35 kg)
Mains Voltage : 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption : <20 W
Backup Battery Life : >10 years
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?