The M3000 is a dual-engine reverb-unit, where both software algorithms and hardware performance is optimized to the highest level. This leaves you with a box that is a no compromise solution solving all your reverb requirements – and in the easiest way thinkable.
Digital Inputs and Outputs
Connectors: XLR (AES/EBU)
RCA Phono (S/PDIF)
Optical (Toslink, ADAT)
Formats: AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Toslink), ADAT Lite pipe
Output Dither: HPF TPDF dither 8-24 bit
Word Clock Input: RCA Phono, 75 ohm, 0.6 to 10 Vpp
Sample Rates: 44.1 kHz, 48 kHz
Processing Delay: 0.2 ms @ 48 kHz
Frequency Response DIO: 20 Hz to 23,9 kHz +0,01/-0,1 dB @ 48 kHz
Analog Inputs
Connectors: XLR balanced (pin 2 hot)
Impedance: 20 kohm
Max. Input Level: +22 dBu (balanced)
Min. Input Level (for 0 dBFS): -10 dBu
Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion: 24 bit (1 bit, 128 times oversampling
A to D Delay: 0.8 ms @ 48 kHz
Dynamic Range: >103 dB (Unweighted), >106 dB (A)
THD: -95 dB (0,0018 %) @ 1kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response: 10 Hz to 20 kHz: +0/-0.2 dB
Analog Outputs
Connectors: XLR balanced (pin 2 hot)
Impedance: 100 Ohm (active transformer)
Max. Output Level: +22 dBu (balanced)
Full Scale Output Range: -10 dBu to +22 dBu
D to A Conversion: 24 bit (1 bit, 128 times oversampling)
D to A Delay: 0.57 ms @ 48 kHz
Dynamic Range: >100 dB (unweighted), >104 dB(A)
THD: -86 dB (0.005%) @ 1 kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response: 10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk: <-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz
Crosstalk: <-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz
EMC
Complies with: EN 55103-1, EN 55103-2 and Class B limits of FCC rules, part 15 CISPR 22, Class B
Safety
Certified to: IEC 65, EN 60065, UL 1419 and CSA E65
Environment
Operating Temperature: 32° F to 122° F (0° C to 50° C)
Storage Temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing
PCMCIA Interface
Connector: PC Card, 68 pin type 1 cards
Standards : PCMCIA 2.0, JEIDA 4.0
Card Format: Supports up to 2 MB SRAM
Control Interface
MIDI: In/Out/Thru : 5 Pin DIN
GPI, Pedal: 1/4" phone jack
General
Finish: Anodized aluminum front, Plated and painted steel chassis
LCD: 56 x 128 dot graphic LCD-display
Dimensions: 19" x 1.75" x 8.2" (483 x 44 x 208 mm)
Weight: 5.2 lb. (2.35 kg)
Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption: <20 W
Backup Battery Life: >10 years
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?