Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
Hum & Noise | -128 dBu Equivalent Input Noise/-98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum |
INPUT Connectors | MIC: 6, / LINE: 4 mono + 4 stereo, / CH INSERT: 4, / AUX RTN: 1 stereo, / 2TR IN: 1 |
OUTPUT Connectors | ST: 2, / AUX SEND: 1, / EFFECT SEND: 1, / CH INSERT: 4, / REC: 1 stereo, MONITOR: 1 stereo, / GROUP: 2 / Phone: 1 |
Crosstalk | -70 dB @ 1 kHz |
Phantom Power | + 48 V |
Input HPF | CH 1-4, / CH 5/6-7/8, / 80Hz, 12dB/oct |
CH EQ (MONO) ±15 dB (Max.) | High | 10 k Hz: shelving |
Mid | 2.5 k Hz: peaking |
Low | 100 Hz: shelving |
CH EQ (STEREO) ±15 dB (Max.) | High | 10 k Hz: shelving |
Mid | — |
Low | 100 Hz: shelving |
Compressor (COMP) | control x 1 (Gain/Threshold/Ratio), CH 1-4 |
Internal Digital Effect | 16 PROGRAM, PARAMETER control |
LED Level Meter Pre MONITOR Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
PEAK Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
Power Supply Adapter | 전기자율안전:JA06001-4003 1차전압 AC 220V 60HZ 정격입력전류:160mA 2차전압AC 17.5V 800mA x2 Cable Length = 1.2m |
Dimensions(W x H x D) | 346.2 mm x 86.1 mm x 436.6 mm |
Net Weight | 3.2 kg |