정확한 음원과 향상된 파워, 최첨단 기능들, 아니면 손쉬운 셋업과 유연한 시스템이 잘 알려진 I-Tech 시리즈는  경량의 Compact한 디자인과, 특허 기술 Class I (BCAR) 채용, 최적의 라우드 스피커 시스템 세팅을 위한 DSP 장착으로 앰프 시장의 진보된 제품으로 인정 받았으며, AES/EBU Input을 통한 완벽한 디지털 연결,  IQ 컨트로과 모니터링, CobraNet 디지털 오디오, 전세계에서 사용 가능한 Universal 전원 공급 장치 장착, 빠른 시스템 Setup을 위한 전면 LCD 화면등을 장착하여 오페레이터의 편의를 도왔습니다.
운드 Quality와 네트워킹 성능에 있어서 I-Tech은 렌탈 제품들 중에서 최고의 제품이라고 할수 있습니다.

Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide.

• Global Power Supply – designed to deliver maximum power no matter where your
  schedule takes you
• Studio Quality Processing – integrated processing reduces DSP noise for a quieter
  overall system
• Peak voltage and RMS power limiting protects your speaker investment
• Front panel LCD provides diagnostics and preset selection to ensure fast and
  easy system setup
• Front panel lockout – ensures that tunings and presets are safely stored and protected
  from curious users
• Remote monitoring and control for complete system control anywhere in the venue
  
   

Performance	I-T4000	I-T6000	I-T8000
Input Sensitivity (volts RMS) for rated output	Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 ohms	37.1 dB to 22.2 dB	37.9 dB to 23.0 dB	39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz)	± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted	> 105 dB
Total Harmonic Distortion (THD) at full rated power	< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB	< 0.35%
Maximum Input Level	+15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs)	Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
A/D, D/A Converters	24-bit 96 kHz Cirrus Logic
Digital Input	AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network	Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP	24-bit conversion with 32-bit, floating-point DSP processing
Attenuators	Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
Damping Factor (8 ohms): 20 Hz to 100 Hz	> 5000
Crosstalk (below rated power, 20 Hz to 1 kHz)	> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)	> 50 dB
DC Output Offset (Shorted input)	< ± 3 mV
Input Impedance (nominal)	20 kilohms balanced, 10 kilohms unbalanced
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono	1-2-4-8-16 ohms 2-4-8 ohms
Required AC Mains	Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
AC Line Connector	USA, UK, European, Australia, India
Construction	All Models
Ventilation	Flow-through ventilation from front to back
Cooling	Dual-zone, microprocessor controlled, continuously variable speed fans
Dimensions	EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
Weight Net Shipping	28 pounds (12.7 kg) 36 pounds (16.3 kg)