외부촬영이나 라이브 사운드 수음에 적합한 DAT용 스테레오 마이크입니다.
혼잡한 주변의 잡음도 최대한 걸러주어 녹음시켜줍니다..^^ With a compact, lightweight design, the AT822 is ideal for DAT recording as well as television, FM and field applications. The microphone is equipped with unbalanced outputs for use with readily available audio and video equipment. Its closely matched elements provide the spatial impact and realism of a live sound field. The mic offers excellent channel separation and switchable low-frequency roll-off.
Ideal for DAT recording as well as television, FM and field applications Compact, lightweight design is perfect for camera-mount use Closely-matched elements provide the spatial impact and realism of a live sound field Excellent channel separation Switchable low-frequency roll-off Includes a 1.7' (0.5 m) cable (XLRF-type to stereo 3.5 mm mini-plug); and a 10' (3 m) cable (XLRF-type to two mono 3.5 mm mini-plugs) Battery operation only
SPECIFICATIONS
ELEMENTS Fixed-charge back plate, permanently polarized condenser POLAR PATTERN X/Y Stereo FREQUENCY RESPONSE 30-20,000 Hz LOW FREQUENCY ROLL-OFF 150 Hz, 6 dB/octave OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa CHANNEL BALANCE <=2.5 dB IMPEDANCE 200 ohms unbalanced MAXIMUM INPUT SOUND LEVEL 125 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 101 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa BATTERY TYPE 1.5V AA/UM3 Warning: The AT822 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result. BATTERY CURRENT / LIFE 1.2 mA / 1000 hours typical (alkaline) SWITCH Off, flat, roll-off WEIGHT 5.8 oz (165 g) DIMENSIONS 7.76" (197.0 mm) long, 2.44" (62.0 mm) maximum head width, 0.83" (21.0 mm) body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type CABLES 1.7' (0.5 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, 3.5 mm stereo mini plug at output end. 10.0' (3.0 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, two 3.5 mm mono mini plugs with 1/4" phone plug adapters at output end. ACCESSORIES FURNISHED Gun-grip snap-in stand clamp for 5/8"-27 threaded stands; camera shoe mount adapter; battery; AT8120 windscreen; soft protective pouch AUDIO-TECHNICA CASE STYLE S3 |