Convert
24bit/96kHz resolution A/D and D/A converters, Format conversion (AES/EBU, S/PDIF and Tos-link) ADAT interface (track bounce)
Sample Rate Conversion
Enter and exit at any Sample Rate e.g. 32, 44.1, 48, 88.2 and 96kHz and make even asynchronous conversion possible
Shape
Five band 24bit Stereo Digital Equalizer
Enhance
Choose between Dynamic EQ, Stereo Adjust, Digital Radiance Generator™ and Spectral Stereo Image
Normalize
Real-time Gain Maximizer
Expand
Variable Slope multiband Expander
Squeeze
Multiband Compressor
Trim
Variable Ceiling multiband Limiter
Fade
Manual or Auto Fade Tool
Dither
Maintain the highest resolution at the digital AES/EBU and S/PDIF outputs, Tos-link and ADAT
Balance
L/R balance in 0.1dB steps
In short, all the tools you need are provided in the Finalizer 96K and makes it essential in your studio.
When you use the Finalizer 96K you can easily enhance the Dynamics of your mix while you mix. Inserted between the Stereo output of your mixer or DAW and your DAT or CDR, it enhances the dynamics and ensures optimal Analog to Digital conversion.
Digital Inputs and Outputs
Connectors: XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT)
Formats: AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe
Output Dither: HPF/TPDF dither 8-24 bit, mono, stereo, inverted
Word Clock Input: RCA Phono, 75 ohm, 0.6 to 10 Vpp
Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Processing Delay: 0.2 ms @ 48 kHz, 0.1 ms @ 96 kHz
Frequency Response DIO: DC to 23.9 kHz ± 0.01 dB @ 48 kHz
DC to 47.9 kHz ± 0.01 dB @ 96 kHz
Compressor THD+N: -130 dB (0.00003%) @ 10 dB Compression, 20 Hz-20 kHz
Sample Rate Conversion Type: Asynchronous
Dynamic Range: 130 dB
THD+N: -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
Input Rate Range: 31 kHz to 49 kHz
Analog Inputs
Connectors: XLR balanced (pin 2 hot)
Impedance: 20 Kohm
Max.Input Level: +22 dBu (balanced)
Sensitivity : @ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
A to D Delay : 0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz
Dynamic Range : >103 dB (unweighted, BW=22 kHz), >106 dB(A)
THD : -95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
Frequency Response : 10 Hz to 20 kHz: +0/-0.2 dB @ 48 kHz
10 Hz to 45 kHz: +0/-1 dB @ 96 kHz
Crosstalk : <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz
Analog Outputs
Connectors: XLR balanced (pin 2 hot)
Impedance: 100 ohm (active transformer)
Max. Output Level: +22 dBu (balanced)
Full Scale Output Range: -10 dBu to +22 dBu
D to A Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
D to A Delay: 0.57 ms @ 48 kHz
0.28 ms @ 96 kHz>100
Dynamic Range: 100 dB (unweighted, BW=22KHz), >104 dB(A)
THD: -82 dB (0.008 %) @ 1 kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response: 10 Hz to 20 kHz
+0/-0.5 dB @ 48 kHz
10 Hz to 45 kHz
+0/-3 dB @ 96 kHz
Crosstalk: <-60 dB, 10 Hz to 20 kHz
typical –90 dB @ 1 kHz
EMC
Complies with: EN 55103-1, EN 55103-2, Class B of FCC rules/part 15, Class B of CISPR 22
Safety
Certified to: IEC 65, EN 60065, UL 1419 and CSA E65
Environment
Operating Temperature: 32° F to 122° F (0° C to 50° C)
Storage Temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing
PCMCIA Interface
Connector: PC Card, 68 pin type 1 cards
Standards: PCMCIA 2.0, JEIDA 4.0
Card Format: Supports up to 2 MB SRAM
Control Interface
MIDI In/Out/Thru: 5 Pin DIN
GPI, Pedal, Fader: ¼" phone jack
General
Finish: Anodized aluminum front, Plated and painted steel chassis
LCD
Dimensions: 56 x 128 dot graphic LCD-display
19" x 1.75" x 8.2 (483 x 44 x 208)
Weight: 5.2 lb. (2.35 kg)
Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption: <20 W
Backup Battery Life: >10 years
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?