When designing the TUBE-TECH CM1A we decided to adjust the attack of the compressor.
The CM1A features exactely the same tube circuit as the famous CL1B Opto Compressor, but we have improved the action of the compressor by carefully selecting a different optical element and fine-tuning the control circuit.
The result is smoother attack and less overshoot providing even more powerful behaviour than the CL1B,
especially noticeable when the CM1A is used for drum recording and mixing + mix bus compression.
Note! this does NOT seriously change the the "classic" charasteristics, known from the CL1B
The sound of the CM1A places it between the LCA2B (Tube VCA) and the CL1B.
CM1A has been extremely well received by numerous top engineers.
The TUBE-TECH CM 1A Compressor features a gain-reduction
element, positioned immediately after the input transformer. It is controlled by
the sidechain amplifier, which also contain the two time control circuits – one
for fixed and one for variable Attack/Release. The two time-controllers can
either be used separately or combined. This circuit contains semiconductor
OP-amps for the entire control.
A tube-based push-pull amplifier follows
the gain-reduction element with variable gain up to 30 dB. A dedicated Bus
selector with three positions (Off, Link 1, Link 2) is used whenever you want to
link several compressors together. Input and output transformers have a
static-screen between the primary and secondary wirings. Input and Output is
transformer balanced as well as fully floating.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?