The Neumann KM 120 Microphone is simply a microphone combination set consisting of the KM 100 phantom power supply / output stage and AK 20 bi-directional (figure 8) microphone element. The swivel mount and windscreen are also included in the set. Neumann's modular KM 100 series is designed to be versatile with the ability to interchange microphone elements and accessories based on individual applications.
The KM 100 is powered via 48 Volt phantom power and is designed for quick connection to all compatible elements and accessories. The KM 100 uses transformer-less circuitry resulting in high output capability and low self-noise. The balanced XLR output is protected against radio frequency interference. The entire microphone circuitry is built into the capsule on a single hybrid module measuring 2cm in area. The result is a compact, interchangeable output stage providing pristine output signal without any coloration.
The AK 20 microphone element features a pressure gradient, single diaphragm transducer with a figure 8 polar pattern. The diaphragm diameter is just 16mm and all sound field components reach the diaphragm directly. The end result is even frequency response and output levels between 0 to 180 degrees in proximity. The figure 8 polar pattern is effective in stereo MS recording (with an AK 40 or other cardioid mic), ambiance capturing or lectures and conferences with 2 speakers at either ends of the microphone.
- KM 100 Output + AK 20 Element
- Bi-Directional Polar Pattern
- Low Noise, High Clarity Signal
- Transformerless Output Circuit
- Modular Design
- Miniature microphones with 7 exchangeable capsules
- Active capsules, detachable up to 50 m from the output stage
- Great variability through capsule extensions and goosenecks
- Switchable 10 dB pre-attenuation enables sound pressure levels up to 150 dB without being overloaded
- Set includes windshield and two different clamps
- Transformerless circuitry
- Extensive accessories
- The KM 100 output stage has a 3-pin XLR connector
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Side-fire figure-8
- Frequency range: 20 Hz - 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 12 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1000 ohms
- Equivalent SPL CCIR 468-3: 26 dB
- Equivalent SPL DIN/IEC 651: 17.5 dB-A
- S/N ratio CCIR 468-3: 68 dB
- S/N ratio DIN/IEC 651: 78 dB
- Maximum SPL for THD 0.5%: 140 dB
- Maximum SPL for THD 0.5% with preattanuation: 150 dB
- Maximum output voltage: 10 dBu
- Dyn. range of the mic. amplifier DIN/IEC 651: 122.5 dB
- Supply voltage: 48 V ± 4 V
- Current consumption: 2 mA
- Matching connector: XLR 3F
- Weight: 102 g
- Diameter: 24/22 mm
- Length: 110 mm