The small but big-hearted KM120 sports a single 16 mm. diaphragm pressure-gradient transducer with a figure-8 pattern that's ideal for bidirectional recording. Its modular construction gives you plenty of flexibility to cover a wide range of applications. Its capsule can detach from the output stage for near invisibility when working with film, video, on stage, or suspended from the ceiling in a concert hall.
With optional accessories you can combine its capsule with other active capsules or microphones to achieve an MS-Stereo setup.
• Miniature microphone with side-fire figure-8 capsule
• Active capsule detachable up to 50 m from the output stage (additional cable needed)
• Great flexibility through capsule extensions and goosenecks
• Switchable 10 dB preattenuation pad
• Transformerless circuitry
• Windshield, clip, and box included
• Directional pattern: Side-fire figure-8
• Frequency range: 20 Hz ... 20 kHz
• Sensitivity at 1 kHz into 1 kohm: 12 mV/Pa
• Rated impedance: 50 ohms
• Rated load impedance: 1000 ohms
• Equivalent SPL CCIR 468-3: 26 dB
• Equivalent SPL DIN/IEC 651: 17.5 dB-A
• S/N ratio CCIR 468-3: 68 dB
• S/N ratio DIN/IEC 651: 76.5 dB
• Maximum SPL for THD 0.5%: 140 dB
• Maximum SPL for THD 0.5% with preattanuation: 150 dB
• Maximum output voltage: 10 dBu
• Dyn. range of the mic. amplifier DIN/IEC 651: 122.5 dB
• Supply voltage: 48 V ± 4 V
• Current consumption: 2 mA
• Matching connector: XLR 3F
• Weight: 102 g (3.6 oz)
• Length: 110 mm (4.33”)