Neumann TLM170R is a studio recording condenser microphone that delivers truly professional results. Neumann TLM170R features a large diaphragm coupled to a variable polar response offering omni, wide angle cardioid, cardioid, hypercardioid, figure-8 patterns. TLM 170 R was primarily designed for vocal, general instrument recording and broadcast applications.
TLM170R features a very smooth, flat frequency response resulting in transparent sound reproduction without any coloration to the signal on output. Five directional characteristics are selectable by means of a rotary switch. In the sixth position, marked R, the directional patterns can be controlled remotely with the N 48 R-2 power supply. There is no special cable necessary for this purpose. Neumann TLM170 R has at its rear a 10 dB attenuation switch for extremely high sound pressure levels, and a high-pass filter to suppress structure born noise. TLM 170 R uses the EA170 shock mount (not included).
- Local and remote controlled large diaphragm microphone
- Pressure-gradient transducer with double membrane capsule
- Five directional characteristics: omni, wide angle cardioid, cardioid, hypercardioid, figure-8
- Patented circuitry for remote and local switching of directional characteristics
- Switchable low frequency roll-off and 10 dB preattenuation
- Tiltable, elastically suspended bracket mount
- Local and remote controlled large diaphragm microphone
- Pressure-gradient transducer with double membrane capsule
- Five directional characteristics: omni, wide angle cardioid, cardioid, hypercardioid, figure-8
- Patented circuitry for remote and local switching of directional characteristics
- Switchable low frequency roll-off and 10 dB preattenuation
- Tiltable, elastically suspended bracket mount
- High SPL Capability - 154dB with prettenuation
- A wooden box and dust cover is included with the microphone
- Neumann TLM 170 R Microphone Specifications
- Acoustical operating principle: Pressure gradient transducer
- Directional pattern: Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8
- Frequency range: 20 Hz - 20 kHz
- Sensitivity at 1 kHz into 1 kohm: 8 mV/Pa
- Rated impedance: 50 ohms
- Rated load impedance: 1000 ohms
- Equivalent SPL CCIR 468-3: 26 dB
- Equivalent SPL DIN/IEC 651: 14 dB-A
- S/N ratio CCIR 468-3: 68 dB
- S/N ratio DIN/IEC 651: 80 dB
- Maximum SPL for THD 0.5%: 144 dB
- Maximum SPL for THD 0.5% with preattenuation: 154 dB
- Maximum output voltage: 10 dBu
- Dynamic range of the microphone amplifier DIN/IEC 651: 130 dB
- Supply voltage: 48 V +/- 4 V
- Current consumption: 3 mA
- Matching connector: XLR 3F
- Weight: 625 g
- Diameter: 60 mm
- Length: 152 mm
- EA 170 Shock Mount not included.