Since its introduction, the EUROLIVE F1220A active floor
monitor has been wildly successful. Building on that legacy, we are proud to
present the even more powerful EUROLIVE F1320D. This 300-Watt active monitor
system has its own 3-band EQ and dedicated volume knob, so you not only have
control of the output, but you can tweak the highs, mids and lows for a clear,
true sense of your performance. And thanks to our Class-D technology, the F1320D
weighs less than 40 lbs (18 kg), making them easy to transport and set up. The
built-in adjustable feedback filter helps eliminate annoying squeals and howls
so you can crank the volume to a level where you can actually hear yourself
above the raging chaos, otherwise known as your band. After all, the main reason
to have a monitor is so you can hear yourself, right? The EUROLIVE F1320D helps
you hear yourself better so you can perform up to your true potential.
Beauty
is Much More Than Skin Deep
Inside these active monitors is the equivalent
of a 2-way electronic crossover, a graphic equalizer, a parametric equalizer, a
mic preamp and two power amplifiers! A long-excursion 12'' driver delivers deep,
punchy low end while the 1'' compression driver, mounted in a custom-designed
horn, provides ultra-wide dispersion of clean, crisp highs. These systems work
together seamlessly, cranking out 300 Watts of super-clean power, and here’s the
best part—you don’t have to be a sound engineer to run it!
Class-D
Amplifier Technology
Our revolutionary Class-D amplifier technology enables
us to make floor monitors that weigh about the same as their passive cousins,
even with a built-in 300-Watt amplifier! Class-D amps are super-efficient little
beauties that don’t generate as much heat as their conventional counterparts, so
they don’t need massive heat sinks to keep them cool. We combine these powerful
amplifiers with state-of-the-art switch-mode power supplies for noise-free
audio, superior transient response and extremely low power consumption.
Custom-Engineered
Transducers
While some manufacturers are content with putting off-the-shelf
transducers in their boxes, we custom-design and build ours from scratch. We do
this because the transducers (woofers and tweeters) are the part of the system
you actually hear, and we want them to sound great. Our loudspeakers deliver
truly impressive performance at levels that easily cut through stage clutter,
even in the most demanding situations. We make our own because they have to be
right—right for each application, and most importantly—right for you!
Speaking
of Control…
The F1320D doesn’t just sound great, it gives you instant
control of your monitor, even mid-performance—something passive monitors simply
cannot deliver! Need more volume? Turn the LEVEL dial until the desired volume
is reached, getting too much bass or treble? Just reach down and tweak the
3-band EQ (HIGH, MID, LOW) to tailor a rich, exciting sound. We’ve even provided
the first line of defense against feedback, a dedicated FREQUENCY dial you can
adjust to eliminate troublesome mic squeals. Total control is always right at
your fingertips with the EUROLIVE F1320D.
Instant
PA System
You can set up an instant sound system with just one F1320D and a
microphone or MP3 player. Thanks to the built-in preamp, you can connect a
dynamic mic directly to the F1320D and raise and lower the volume with the Level
control. Fast and easy to set up, you can be ready for “show-time” at a moment’s
notice. There’s even a built-in 35-mm socket, so you can mount the F1320D on a
standard speaker pole for use as a PA system. And if you need more coverage,
chain together as many F1320Ds as you’d like via the convenient XLR or 1/4" TRS
LINK OUTPUT connector.
Versatility
When
is a monitor more than a monitor? When it’s used as an instrument amplifier.
Yes, you read that right; the F1320D can also be used as an onstage amp for
keyboards, acoustic guitar, electric violin, etc. You name it—if it’s got either
a mic or line-level output, you can connect it to the F1320D. Need a keyboard
amp and a vocal monitor, but don’t have the space on stage for both? Use one of
our small-format XENYX mixers to sub-mix the Aux Sends from the main mixer with
your keys, all into a single active monitor.
Awesome
Sound, Unbelievable Value
The F1320D is the ideal solution for
performers/emcees seeking a high-quality active monitor or portable PA system
that sets up in a flash. Loaded with a slew of incredible features, but never
loaded down by a heavy price tag, the F1320D is an excellent way to expand your
current sound system’s capabilities without shrinking your wallet. Audition some
EUROLIVE F1320Ds at your authorized BEHRINGER dealer today. Then ask them to
join the band
Product
Features:
- High-power 300-Watt 2-way monitor speaker system for
live and playback applications
- Exceptional sound quality, wide frequency bandwidth and
dynamic range
- Revolutionary Class-D amplifier technology: enormous
power, incredible sonic performance and super-light weight
- Adjustable feedback filter and integrated limiter for
ultimate system control and speaker protection
- Integrated sound processor for ultimate system control
and speaker protection
- Ultra-low noise Mic/Line input with Volume control and
Clip LED
- Dedicated 3-band EQ for perfect sound shaping
- Extremely powerful 12'' long-excursion driver provides
incredibly deep bass and acoustic power
- High-resolution 1'' HF driver for exceptional
high-frequency reproduction
- Proprietary horn design for ultra-wide sound
dispersion
- Internal switch-mode power supply for noise-free audio,
superior transient response and very low power consumption
- Integrated 35 mm pole socket for stand mounting and use
as PA system
- High-quality components and exceptionally rugged
construction ensure long life
- Conceived and designed by BEHRINGER
Germany
SOLD OUT
SOLD OUT
