The Peluso CEMC-6 is a solid-state small diaphragm condenser microphone. The CEMC-6 ships with a fixed cardioid pattern capsule with a 20-millimeter gold sputtered diaphragm. The capsule is easily swapped with additional capsules (not included) that provide omni-directional, cardioid, wide cardioid, or hyper-cardioid patterns. The CECM-6 features a 10 dB and 20dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This is a very versatile microphone used in the studio for vocals and acoustic instruments to drum overheads. For the remote recorder this is a great mic for orchestras and live audience tapers. You'll always get great results from one of the most versatile best sounding small diaphragm mics on the market. Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available. Acoustically matched pairs available with our Stereo Kit. The Single CEMC-6 ships with a hard mount. The Peluso Small Diameter Shock Mount is available separately. Includes one CEMC-6 Microphone with Cardioid Capsule, a Hard Mount, and Wooden Storage BoxTechnical Data Type: Condenser Pressure Gradient w/ 20mm capsule Frequency Range: 19Hz/25Khz Polar Pattern: Cardioid w/ removable capsule Sensitivity: 10 mv/pa Impedance: 200 ohms SPL: 156 dB w/ 20dB pad switch engaged Equivalent Noise: 14 dB(A) Power Requirements: Phantom - 48v ± 4v Current Consumption: < 3.0 MA Size: 22mm x 164mm Weight: 134 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?