Performance
|
Frequency
Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) |
± 0.25 dB |
Signal to
Noise Ratio below rated full-bandwidth power, A-weighted
|
> 108 dB |
Total Harmonic
Distortion (THD) at 1 watt into 8 ohms |
< 0.1% |
Total Harmonic
Distortion (THD) Plus Noise at full rated power |
< 0.35%, 20 Hz to 20 kHz
|
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,
from full rated output to –30 dB |
< 0.35% |
Damping Factor (20
Hz to 100 Hz at 8 ohms) |
> 5000 |
Crosstalk (below
rated power, 20 Hz to 1 kHz) |
> 80 dB |
Common
Mode Rejection (CMR) (20 Hz to 1 kHz) |
> 55 dB, typically > 70 dB |
DC Output
Offset (Shorted input) |
< ± 3 mV |
Input Impedance
(nominal) |
10 kilohms balanced, 5 kilohms unbalanced
|
Maximum
Input Level |
+20 dBu typical |
Load Impedance
(Note: Safe with all types of loads)
|
Stereo: 1/2/4/8/16 ohms
Bridge Mono: 2/4/8 ohms |
Input
Sensitivity (referenced to 8 ohm rated output) |
1.4V, 32 dB gain, and 26 dB gain |
Voltage
Gain (referenced to 8 ohm rated output) |
MAi-5000i: 37.1 dB to 22.2 dB |
MAi-9000i: 37.9 dB to 23.0 dB |
MAi-12000i: 39.3 dB to 24.5 dB |
Required AC Mains
|
Universal AC input, 100-240VAC , 50/60 Hz (±10%).
Maximum AC mains voltage 264VAC. |
AC Line Connector
|
Five cordsets supplied with amplifier (USA, UK,
European, Australia, India) |
Construction
|
Cooling
|
Dual-zone, microprocessor controlled,
continuously variable speed fans, front-to-back airflow |
Front Panel
|
Cast aluminum with integrated handles.
|
Weight |
28 pounds (12.7 kg) net, 36 pounds (16.3
kg) shipping. |
Dimensions (W x H x
D) |
19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2
in. (41.1 cm) D. |
Protection |
Amplifier is protected against reactive loads,
faults and shorts. If one channel experiences a catastrophic failure, the entire
amplifier will shut down.
|